This Titanium Signature Series diesel fuel lift pump by FASS Fuel Systems is a game - changer for 2019 - 2020 Dodge Ram 6.7L Cummins engines. With a power rating from stock to 600hp, a flow rating of 100 gallons per hour, and a preset fuel pressure of 8 - 10 PSI, it offers outstanding performance. The 2 - micron filtration rating and 30,000 - mile filter life expectancy protect your injection system and extend the life of your injection pump and diesel injectors. Backed by a limited lifetime warranty, it can support multiple fueling upgrades. The kit includes two FASS (Bulkhead and Suction Tube Kit). The new design speeds up installation and allows you to operate safely with less than 1/8 tank of fuel. Features like Whisper Technology, Performance Radius Cuts, and Mass Flow Return make it a top choice. FWT reduces noise while increasing flow, PRC improves fuel flow, and MFR polishes your fuel. For 19 - 20 Cummins with CP3 recall, D12RK1001 is needed. Part Number: TSD12100G, Superseded Part Number: TS D12 100G.

Using this lift pump is straightforward. First, install the Bulkhead and Suction Tube Kit. The new design makes it easy - you can plumb the suction and return lines directly to the bulkhead fitting on the fuel tank module without cutting the filler neck. Make sure to use the D12RK1001 fittings if your 19 - 20 Cummins has or is going for the CP3 recall. For maintenance, replace the filter every 30,000 miles to keep the filtration system working well. Also, keep an eye on the fuel pressure and flow rate. If you notice any unusual noises or a drop in performance, it might be time to check the pump. In cold weather, the optional FASS Fuel Heater can help ensure smooth operation. And remember, this pump comes with a limited lifetime warranty, so you can use it with confidence.