This Titanium Signature Series diesel fuel lift pump from FASS Fuel Systems is a top - notch aftermarket filtration solution. It's designed to offer outstanding performance, long - lasting durability, and high reliability in the diesel industry. **Fits**: It's suitable for 2005 - 2018 Dodge/RAM with 5.9L / 6.7L Cummins engines and 2021 - 2023 Dodge/RAM with 6.7L Cummins engines. **Specs**: It has a power rating from stock to 600hp, a flow rating of 100 gallons per hour, a preset fuel pressure of 16 - 18 PSI, a filter life expectancy of 30,000 miles, and a filtration rating of 2 microns. It comes with a limited lifetime warranty. **Benefits**: It can support multiple fueling upgrades for your Dodge Cummins diesel engine. It also provides advanced filtration to protect your injection systems, extending the life of your injection pump and diesel injectors. The kit includes two FASS components, with bulkhead fittings made from 6061 T - 6 billet aluminum and a PTFE Teflon pickup tube that can be easily adjusted for different fuel tank depths. **Features**: New Whisper Technology reduces noise while increasing fuel flow. It includes a bulkhead fitting suction tube, has a new bolt - on bracket installation for easy setup, protects and extends injector life, improves cold - weather starts, has the quietest motor on the market, enhances fuel mileage and volume delivery, and has a 1,000,000 - mile motor. **Advanced Technologies**: FASS Whisper Technology meets high - quality standards. Performance Radius Cuts improve fuel flow and prevent air re - entry. Mass Flow Return technology polishes fuel continuously, and the new bolt - on bracket mounts simplify installation. **Notes**: If you have a 19 - 20 Cummins and your truck has or is going in for the CP3 recall, D12RK1001 is necessary to correctly plumb the Fass feed line.

**Using Your Lift Pump**: Install the lift pump according to the provided instructions. Make sure to connect all the fittings properly. Once installed, start your engine and let it run to check if the lift pump is working. The pump will automatically supply fuel to your engine at the preset pressure. **Maintenance Tips**: Replace the filter every 30,000 miles to keep the pump working efficiently. Check the fuel pressure regularly to ensure it stays within the 16 - 18 PSI range. If you notice any unusual noises or a decrease in performance, stop using the pump and check for possible issues. **Cold - Weather Operations**: In extremely cold weather, consider using the optional FASS Fuel Heater. This will help ensure that the fuel doesn't freeze and that the pump can operate smoothly. **Special Note for 19 - 20 Cummins Owners**: If your truck has or is going in for the CP3 recall, make sure to use the D12RK1001 fittings to correctly plumb the Fass feed line. This will ensure proper fuel flow and prevent any potential problems.