Description: This FPE - 34754 Fuel System Upgrade by Fleece Performance is a top - notch fuel supply upgrading kit designed for the 1998.5 - 2002 Dodge Ram with a 5.9L Cummins engine. It has everything you need to correctly plumb, route, pump, and filter fuel for your VP engine. Even better, it comes with a new sending unit and float to make your old fuel gauge work again! If you're looking for more than just a basic lift pump, the Fleece PowerFlo Upgrade Kit is your ideal choice. It can completely upgrade the aging fuel system in your 5.9L engine. The PowerFlo Lift Pump is the latest OEM replacement performance lift pump on the market for the 5.9L Cummins engine. It's the only in - tank lift pump capable of supporting up to 800hp. Fleece Performance are well - trusted diesel experts in the industry. Part Number: FPE - 34754. Features: 1. Direct OEM In - Tank Fitment: The PowerFlo Lift Pump is easy to install. You don't need to drill, cut, or create sumps in your fuel tank, and it takes less than half the time of other high - flow lift pumps. 2. Dual Gerotor: With two OEM quality gerotor pumps, it increases flow capacity and reliability compared to the factory pump. It can support up to 800 hp, even in dual CP3 pump configurations. 3. Seamless Integration: The active fill bucket gets rid of the need for tank sumps, draw straws, and solves the ¼ tank issues often faced when looking for a higher - flow lift pump. Includes: PowerFlo In - Tank Lift Pump, Donaldson 3 Micron Fuel Filter & Water Separator (Donaldson P553207), Filter Base w/ Integral Mounting, Distribution Filter Block & Filter Coupler, Push Lock Hose & all necessary AN/Barb Fittings. Installation: Click Here. Warranty: The PowerFlo Lift Pump comes with a Limited Lifetime Warranty when purchased with this kit. Check the PowerFlo Lift Pump Warranty Policy for details.

Using this fuel system upgrade is straightforward. First, make sure your vehicle is turned off and the engine is cool. Remove the old fuel system components carefully. Then, install the PowerFlo In - Tank Lift Pump. Thanks to its direct OEM in - tank fitment, you don't need to do any complex drilling or cutting. Next, attach the Donaldson 3 Micron Fuel Filter & Water Separator to the filter base. Connect all the hoses and fittings using the provided push - lock hose and AN/Barb fittings. Once everything is connected, double - check all the connections to ensure there are no leaks. Start your vehicle and let it run for a few minutes to make sure the new fuel system is working properly. When it comes to maintenance, regularly check the fuel filter. Replace it as recommended by the manufacturer to keep the fuel system working efficiently. Also, inspect the hoses and fittings for any signs of wear or damage. If you notice any issues, replace the parts immediately. Remember, the PowerFlo Lift Pump has a limited lifetime warranty when purchased with this kit, but always follow the proper installation and maintenance procedures to ensure its longevity and performance.