This 6 - inch ReadyLift lift kit is designed for 2022 - 2024 Toyota Tundra models with rear coil springs. It's engineered for easy setup, retaining suspension geometry and proper driveline angles. You'll enjoy excellent driving and handling no matter the conditions. The kit retains the factory turning radius and works with auto - adjust headlights. Its CNC - bent, welded, and boxed sub - frame drop assemblies keep the suspension geometry intact. It increases ground clearance with minimal trimming. The sub - assembly correctly positions the differential to maintain CV axle and driveline angles. Tire fitment allows for 5.75 - inch backspace (18 - 20mm Offset) on 20x9 with 35 - inch tires, and with trimming, 5.5 - inch backspace (10 - 13mm Offset) on 20x9 with 37 - inch tires. The kit includes front and rear crossmembers, a skid plate, front strut spacers, and more. Note that it's not for 2022+ Tundra TRD Pro with Bilstein coilover shocks, certain rear sway bar options, or trucks with specific suspension systems. It only works with factory 20 - inch wheels, and most aftermarket 20 - inch or larger wheels are compatible. Toyota recommends specific OEM lift kit cv shafts for lifted 22 - UP Tundras to avoid damage in 4WD.

How to Use: First, make sure you have all the parts from the kit, including the hardware pack and instruction manual. Follow the step - by - step instructions in the manual carefully for installation. It's important to double - check the fitment of your vehicle before starting. During installation, pay attention to aligning the parts correctly, especially the sub - frame drop assemblies and differential. Make sure the brakes, headlights, and suspension components are properly adjusted. Precautions: Don't use this kit on 2022+ Tundra TRD Pro with Bilstein coilover shocks, trucks with the TRD rear sway bar option, or those equipped with Load - Leveling Rear Height Control Air Suspension or Adaptive Variable Suspension (AVS). Only use factory 20 - inch wheels, and confirm the fitment of aftermarket wheels before installation. Always use the recommended Toyota OEM lift kit cv shafts on lifted 22 - UP Tundras to prevent damage in 4WD. Maintenance: Regularly check the hardware for tightness, especially after driving on rough roads. Inspect the suspension components for any signs of wear or damage. Keep the skid plate clean to prevent rust. Check the brake lines and ABS components periodically to ensure they are in good condition.