Enhance your vehicle's braking performance with EBC S2 Kits featuring Greenstuff Pads and USR Rotors. The Thermic Black coating on the rotors is an anti - corrosion shield that provides long - lasting rust resistance. No need to remove it before installation. Just install the pads and rotors, and within the first 10 to 20 stops after installation, the brake pads will naturally remove the coating in the swept area. Never use brake cleaner or other methods to remove the coating, as this is not covered by the EBC warranty. Remember, do not upgrade the rear pads unless the same upgrade is done on the front. This kit fits a wide range of models including 2013 - 2016 Scion FR - S Base, 2013 - 2022 Subaru BRZ in various trims, 2011 - 2016 Subaru Impreza in different versions, 2013 - 2014 Subaru Legacy models, and 2015 - 2016 Subaru WRX models.

Using this EBC S2 brake kit is easy. First, make sure you upgrade both front and rear pads at the same time, or at least upgrade the front if you're doing a partial upgrade. When you receive the kit, don't worry about removing the black coating on the rotors. Just install the pads and rotors as you normally would. After installation, drive your vehicle and make about 10 to 20 stops. During this process, the brake pads will remove the coating in the area they sweep. As for maintenance, avoid using brake cleaner or any other harsh chemicals on the rotors to remove the coating. This can void your EBC warranty. Also, regularly check your brake pads for wear and replace them when they start to get thin. Keep an eye on your braking performance, and if you notice any issues like squealing or reduced stopping power, have your brakes inspected by a professional.