Don't fit upgrade pads to the rear of your vehicle unless the same upgrade is fitted to the front. The Thermic Black coating on the rotors is an anti - corrosion layer for long - lasting rust resistance. You don't need to remove it before installation. Don't use brake cleaner or other methods to remove this coating, as it's not covered under the EBC warranty. The coating will naturally wear off in the pad swept area within the first 10 to 20 stops after installation. This brake kit fits various Subaru models from 1996 - 2002, including Impreza and Legacy series like Brighton, L, GT, and more.

Using your EBC S2 brake kit is easy. First, make sure you fit the upgrade pads on both the front and rear or only on the front. Don't try to remove the Thermic Black coating on the rotors before installation. Just install the pads and rotors as you normally would. When you start driving, the coating will gradually wear off in the areas where the pads touch the rotors within the first 10 to 20 stops. As for maintenance, keep an eye on your brake performance. If you notice any strange noises or reduced braking power, it might be time to check the pads and rotors. Remember, don't use brake cleaner or any other method to remove the Thermic Black coating, or you'll void the EBC warranty.