Description
Fits
| Year | Make | Model | Engine |
| 2005 - 2010 | Ford | F - 250/F - 350 Superduty 2WD | 6.0L, 6.4L, 6.7L Powerstroke |
Note: Suitable for all trucks including those with 5th wheel hitches, but not for commercial cab and chassis trucks. Works for both gas and diesel applications.
Tired of truck sag, sway and bottoming out? Say goodbye to these issues with the Pacbrake ALPHA HD PRO! These air bags with Jounce Bumpers come with 1 - inch thick corrosion - resistant end caps and 20 support wires, offering ultimate strength and durability.
This kit has a bouncy polyurethane bumper inside the bag to prevent damages from bottoming out. It's perfect for those who want an internal bumper for peace of mind and enjoy a comfortable ride without air when not towing.
Customers can choose to buy a Pacbrake air suspension kit with or without an in - bag bump stop.
Why Pacbrake added a bump stop to their bags
Peace of mind. Customers want a bump stop to avoid bottoming out due to loss of air bag pressure, a rare event that could damage the air bags or the truck frame. Think of it as an 'insurance policy' against bottoming out.
An added benefit is that you can run these air bags at 0 psi when unloaded for a great ride comfort.
Are bump stops necessary?
No! For those who need maximum travel in their air bags, like raising and lowering the rear end for trailers or boats, or off - roading, air bags without bump stops are recommended. Consider the HP100182 ALPHA HD air bag.
Part Number: HP10182 - J
Features
- 5,000 lbs of load - leveling capacity
- 4 - hour install time
- Lifetime warranty
- Can be run at 0 psi
Installation
Notes
- Never exceed the manufacturer's recommended Gross Vehicle Weight Rating.
Videos
Using your Pacbrake ALPHA HD PRO Rear Air Suspension Kit is easy. First, check if your truck is the right fit - it's for 2005 - 2010 Ford F - 250/F - 350 Superduty 2WD with 6.0L, 6.4L, 6.7L Powerstroke engines. When installing, it should take about 4 hours. You can choose whether to use the in - bag bump stop. If you want peace of mind and protection from bottoming out, keep it. If you need maximum travel for tasks like hooking up trailers or going off - road, you can choose to not use it. Remember, you can run the air bags at 0 psi when the truck is unloaded for a more comfortable ride. But always make sure you don't go over the manufacturer's recommended Gross Vehicle Weight Rating. For maintenance, regularly check the air bags for any signs of wear, and keep the corrosion - resistant end caps clean. With a lifetime warranty, you can enjoy using this suspension kit worry - free.
