Description
Fits
| Year | Make | Model |
| 2001 - 2006 | Toyota | Tundra 2WD/4WD |
Note: This kit is for trucks where the upper jounce bumper pad sticks out 1' below the frame. All Toyota kits need at least 5'' between the tire and the frame and fit only with stock wheels and tires.
Tired of truck sag, sway, and bottoming out? Say goodbye to these issues with Pacbrake's ALPHA HD PRO! These air bags/air helper springs (with Jounce Bumpers/Bump Stops) have 1 - inch - thick corrosion - resistant end caps and 20 support wires for great strength and durability.
This kit has a bouncy polyurethane bumper inside the bag to prevent damages from bottoming out. It's perfect for those who want an internal bumper for peace of mind and enjoy a comfortable ride without air when not towing.
Customers can choose to buy a Pacbrake air suspension kit with or without an in - bag bump stop.
Why Pacbrake added a bump stop to their bags
Peace of mind. Customers want a bump stop to avoid bottoming out due to loss of air bag pressure, a rare event that could damage the air bags or the truck frame. It's like an 'insurance policy' against bottoming out.
Another benefit is that you can run these air bags at 0 psi when unloaded for a super - comfortable ride.
Are bump stops necessary?
No! For those who need maximum travel in their air bags, like for hitching trailers or boats or off - roading, air bags without bump stops are recommended. Consider the HP100158 ALPHA HD air bag.
Part Number: HP10158 - J
Features
- 5,000 lbs of load - leveling capacity
- 2.5 - hour install time
- Lifetime warranty
- Can be run at 0 psi
Installation
Notes
- Never go over the manufacturer's recommended Gross Vehicle Weight Rating.
Videos
This Pacbrake ALPHA HD PRO rear air suspension kit is designed for 2001 - 2006 Toyota Tundra 2WD/4WD trucks. To install, it takes about 2.5 hours. Just follow the installation guide and click the provided link for more details. When using, make sure not to exceed the manufacturer's recommended Gross Vehicle Weight Rating. If you choose the kit with a bump stop, it gives you peace of mind by preventing bottoming out in case of air bag pressure loss. You can even run the air bags at 0 psi when the truck is unloaded for a super - comfortable ride. If you need maximum travel for hitching trailers, boats, or off - roading, consider the option without a bump stop. For maintenance, check the corrosion - resistant end caps and support wires regularly. Also, keep an eye on the polyurethane bumper inside the bag to ensure it's in good condition.
